Cut Your Energy Bills Today

byadmin

Keeping warm in the winter can be a challenge, especially when you’re faced with high heating bills. Most people use space heaters and other direct contact heating to keep them warm while running their furnaces on low in the background. Whether you’re using propane tanks in Manchester CT, or power from your local energy company, there are ways to save on heating costs. Here are a few of them to get you started.

Whole Home Insulation

If you haven’t already done so, make sure that your home is fully insulated for the winter. It’s not enough to just insulate the attic and not the rest of the home, especially if you have an older structure. Your walls need to be insulated to keep the cold air from coming into the cracks and crevices of the outer walls of your home. You can have a company do this for you, or you can do it yourself. It’s one of the best ways to keep the heat in and save on heating costs in the winter.

Window Coverings

Your window coverings should have a thermal backing. Thermal coverings can help keep the cold out. You can also cover your windows with plastic to ensure that no cold air seeps in from that area. This is a simple task that can be done within a few hours, depending on the size of your home. When you’re out buying propane tanks in Manchester CT, stop and pick up a roll of plastic. It’s inexpensive and could make a big difference in the amount of cold air that enters your home from the windows.

Layered Clothing

When you’re at home in the winter, layer up your clothing to keep from having to turn up the thermostat. Add a layer of long johns to your normal clothing, and this could make a big difference in how you feel. Heavy sweaters that are easy to remove are also ideal in winter. Wool socks and other warm materials can be beneficial when the winter months arrive and you’re not able to pay for the increase in power needed to keep warm. You will need to keep your pipes from freezing, so turning your furnace off entirely to use a space heater or any other source of alternative heating is not recommended.

Start your search for propane tanks in Manchester CT now, and start seeing a difference in your energy costs.

Nigeria hands over disputed area to Cameroon

Monday, August 14, 2006

Nigerian and Cameroonian officials held a joint ceremony to mark the formal handover of the Bakassi peninsula from Nigeria to Cameroon. Nigeria agreed to cede the resource-rich area after a long drawn dispute with Cameroon. The ceremony comes after Nigeria completed the withdrawal of its troop stationed in the northern part of the peninsula. Many Bakassi residents are reported to be opposed to living under Cameroon’s authority.

Posted in Uncategorized

Grand National winning horse ‘Comply or Die’ dies, aged 17

Wednesday, May 11, 2016

Comply or Die, the racehorse who won the 2008 Grand National has died at the age of 17. His death was announced by his former trainer, David Pipe. He died over at the weekend in Gloucestershire, where he had been staying with jockey Timmy Murphy. He was cremated on Monday and his ashes will return to Murphy.

Murphy was the jockey in the saddle when Comply or Die won the 2008 Grand National. Speaking to the Press Association, he spoke about the horse’s death. He said, “He was part of the furniture at home so it’s very sad. He gave me the greatest day of my career, obviously that can never be taken away. He paraded at Cheltenham and Aintree and was getting ready to do some dressage in the summer. I’m not actually sure how he died, to be honest, but it wasn’t nice to come home to. He was cremated on Monday. He was a happy horse and he was also very clever.”

During his racing career he made £798,809 in prize-money after winning a total of eight races.

The 2008 Grand National victory was his greatest achievement and he almost matched it when he came second place in 2009. He retired in 2011 but remained active, often being paraded at race grounds such as Aintree and Cheltenham. He also participated in some hunting activities. Pipe said, “Since his retirement he had been a lead-horse at Timmy Murphy’s establishment before trying his hand at dressage, a discipline in which he had proven very successful”.

Tributes have been paid to Comply or Die on social media by horse racing fans with several tweeting their appreciation and memories.

Posted in Uncategorized

Romanian tourism to be rebranded

Friday, May 6, 2005

Romania’s National Authority for Tourism (ANT) announced that they would promote tourism in Romania through a new branding strategy, in collaboration with the United States Agency for International Development. The director of ANT, Marius Critonescu, said that the branding exercise will be “a significant component of the Romania’s development as a new tourist destination of international level.” He also added that the development of an integrated brand for Romanian tourism will promote a more positive image for the country, thereby increasing the number of tourists and investors. In recent times, there has been quite a lot of investment in “national branding”, especially in the field of tourism, as most marketing experts believe that branding for a product or a country is theoretically the same thing, and that the same strategies and approach should be used for both.

Concerning the Romanian tourism rebranding, international tourism and marketing expert James MacGregor stated that, “We have to touch the hearts and souls of the contemporary tourists who no longer travel for a simple beach or ski track. They want to live a self-knowledge experience that is truly uplifting and will leave unforgettable memories. The brand must show them not what they will see or do as tourists but what they will feel when visiting Romania.”

Posted in Uncategorized

Why Choose A Small Hole Edm

Why Choose a Small Hole EDM

by

Frieda Kuechle

Small hole EDM is just one of the many varieties of electrical discharge machining processes available. An EDM uses electrodes that give off a speedy persistent electrical currant to wear down through metal and have quite a lot of uses. The small hole EDM is built to have the ability to craft holes in the material you are working with. You have the option to changes the sizes, amount, and spacing of the holes. These holes might be designed for plenty of completely different makes use of, all the pieces from creating rows of holes within the turbine blades of a jet airplane all the way to making small microscopic holes to be used in gas system components.

There include loads of great reasons to make use of a small hole EDM such as; drilling deep holes, drilling on an angled surface, drill via exhausting supplies, drilling with out clutter, you gained\’t must take care of deburring holes, saves you from damaged drills, creates deep straight holes, and they\’re capable of being programmed.

Using Small Hole EDM To Drill Deep Holes

Trying to make a deep gap with an ordinary drill could be a daunting chore. With this methodology, you may ensure you can get small holes as much as 36 inches deep.

Drilling on an Angled Material

[youtube]http://www.youtube.com/watch?v=nLsDVoGKlfs[/youtube]

Drilling on an angled surface could make issues if the drill wants to follow the angle of the material. With EDM you\’ll have no drawback drilling into an angled surface as a result of the electrode won\’t touch the workpiece.

Drilling Strong Workpieces

A lot of supplies like onerous metal are impossible to drill via, however small hole EDM aren\’t impacted by the density of the material. The only factor that will slow it down is the conductivity of the material you might be utilizing.

Drilling With out Mess

Drilling by materials such as aluminum can fashion small gummy chips that stick to the drill bit. Given that this drill using digital currents, there\’s not anything to stay to and the dielectrical liquids rinse away any chips.

No Deburring

Traditional drills leave an extra step of deburring the holes after they become filled with bits and pieces from the hole. EMD drilling lets the erosion to get flushed away by the dielectrical liquid and prevents you from having an additional step.

No Damaged Drill

With commonplace drills, they must be managed to forestall them from being damaged. However, with EDM the electrodes by no means make contact hence there\’s not anything to break down.

Form Deep Straight Holes

Again the non-contact process is a profit, due to its design you possibly can simply make straight holes where a regular drill would have failed.

Able To Instruct Equipment

One of the perfect advantages of the small hole EDM is that it is able to be programmed, allowing you to decide the diameter and deepness of every hole.

After realizing the advantages of utilizing a small hole EDM, you possibly can resolve if it is proper for your machining wants. There are various forms of EDM out there for buy together with many companies that may assist you to complete a challenge that wants machining.

AccuteX EDM

strives to locate the right machining tool for every client. In the event that you\’re searching for

small hole drilling EDM

, click here right away to learn more concerning the broad variety of EDM machines available.

Article Source:

ArticleRich.com

Nokia appoints Microsoft Business Division Head as chief executive

Sunday, September 12, 2010

The Finnish communications corporation Nokia announced that its Head will change on September 21. The previous chief executive Olli-Pekka Kallasvuo will continue to chair in non-executive capacity. The head of Microsoft Business division Stephen Elop will take the position. It is the first time a non-Finn becomes Nokia president and chief executive.

The change follows Nokia’s fall in world markets. It includes a decrease in Nokia’s American market share to less than ten percent after failed negotiations with a number of leading American phone providers. An analyst at a market analyst company Canalys, Pete Cunningham, said, “Despite holding 38 percent market share of the smartphone market, Nokia’s failure to compete with the iPhone and high-tier Android devices, combined with its lack of progress in gaining significant traction in the United States, has led to press and investor dissatisfaction.”

Some commenters suggested that Nokia chose Mr. Elop partly because he is a Canadian, following criticism of American candidates by the Finnish press. However a Nokia spokesman rejected this, saying, “Nationality was not a selection criteria.”

Stephen Elop was president and CEO of the graphics and web-development software house Macromedia prior to its acquisition by Adobe in 2005. He then joined Microsoft as President of Microsoft’s Business Division in January, 2008. Commenting on his new role he said, “Nokia has a unique global position as well as a great brand upon which we can build. The Nokia slogan clearly states our key mission: Connecting People, which will acquire new dimensions as we build our portfolio of products, solutions and services.”

In the announcement the Chairman of the Nokia Board of Directors Jorma Ollila stressed an expected shift of focus from hardware to software. “His [Stephen Elop’s] strong software background and proven record in change management will be valuable assets as we press harder to complete the transformation of the company. We believe that Stephen will be able to drive both innovation and efficient execution of the company strategy in order to deliver increased value to our shareholders”.

Nokia stated in an official blog post, “Nokia is transitioning from a hardware manufacturer of mobile devices to a software and solutions business. …Stephen’s background in the software industry is one of his key strengths.”

Posted in Uncategorized

Canadian still faces public beheading in Saudi Arabia

Wednesday, May 20, 2009

A copy of a letter written to the Prime Minister of Canada Stephen Harper by a Canadian man facing the death penalty in Saudi Arabia has been obtained by The Canadian Press. In it, Mohamed Kohail pleads with the prime minister to utilise “every way possible to get me out of this situation.”

Kohail, 23, of Montreal, was sentenced on March 3, 2008 to be publicly executed following a confession for murder at a Saudi school. Kohail claims the confession was obtained under duress. The Saudi Supreme Court advised the lower court on April 9, 2009 to renounce the death penalty; however, the request was refused.

Munzer Al-Hiraki, 19, was killed in an after-school fight in January 2007, allegedly after Kohail’s brother, Sultan, insulted a girl. The brothers claim that the fight involved a large group of boys, and felt they were acting in self defense.

Sultan, 16 at the time, said that Mohamed came to his rescue with a friend, only to be greeted by a group armed with knives and clubs. Witnesses for the brothers say that Al-Hiraki had arrived at the school with carloads of friends to seek vengeance on Sultan.

“I was tortured to sign a confession. I was misinformed that I would be allowed out of custody the moment I signed it,” said Kohail.

In the letter, delivered by Canadian MP Deepak Obhrai last December, Kohail continues, “Mr. Harper, I have been in jail for two years now. I am imprisoned with hundreds [of] high-profile criminals in Saudi Arabia for a crime that I did not commit. I’ve lost my hair, two years of my life and see death coming to me closer every day.”

Kohail received 80 days to appeal the sentence. “There were nine hearings in total and only one time was the lawyer for Mohamed and his friend allowed in the courtroom; not even Mohamed’s father, Ali (was allowed in),” said a relative.

Harper is seeking clemency for the Kohail brothers. “It has to be worked within the confines of the Saudi law and it’s important to recognize that and work with the Saudi officials to come to a resolution,” said Foreign Affairs Minister Lawrence Cannon. According to the letter, the Canadian government began seeking clemency March of 2008.

If the court continues to uphold the death penalty, the only other option is the payment of dia, or blood money, in exchange for forgiveness — but Al-Hiraki’s family seeking CA$5 million.

Sultan Kohail is a juvenile who is out on bail awaiting to be tried in adult court on murder charges. The Convention on the Rights of the Child forbids execution of youths under the age of 18, which Saudi Arabia officials declare they comply with. However, the Convention also prohibits execution for crimes committed as juveniles no matter when the court sentences them.

Born in Palestine, the Kohail brothers moved to Canada in 2000, and became Canadian citizens in 2005. They moved to Jiddah in 2006.

In October 2007, Canadian Public Safety Minister Stockwell Day said, “We will not actively pursue bringing back to Canada murderers who have been tried in a democratic country that supports the rule of law.” Previously Canada consistently sought clemency from all foreign governments after the death penalty was abolished in Canada in 1976.

Since the beginning of 2009, 36 people have been executed in Saudi Arabia. 102 were executed in 2008 and 158 were executed in 2007.

Posted in Uncategorized

Conditions Commonly Treated By Foot Surgeons In Racine, Wi

byadmin

There are many conditions that impact patients’ feet and ankles, leaving them with pain, discomfort, and potentially severe mobility issues. Many of these conditions can be treated medically, but some really require the help of foot surgeons in Racine WI for resolution. Read on to find out about a few conditions commonly treated with foot surgery below.

Hallux Rigidus

Also known simply as a stiff big toe, Hallux Rigidus causes pain and stiffness that can make it difficult to walk. This condition originates from trauma due to degenerative forms of arthritis and is often exacerbated by damp, cold weather. While wearing the right shoes and applying natural lubricants or steroid injections may temporarily ease the discomfort associated with this condition, surgery is often required to restore mobility in serious cases.

Hallux Valgus

More often referred to as a bunion, this condition is one of the most common foot deformities. It manifests as a bony bump between the big toe and the foot and often causes the big toe to bend inward. Bunions can be extremely painful, so those suffering from serious deformities often choose to have surgery to reduce pain and increase mobility.

Hammertoe Disorders

Hammertoe refers to a disorder in which a patient’s toes bend at abnormal angles, causing pain and other problems. This condition is caused by a muscle and tendon imbalance, which is often the result of leaving bunions untreated for prolonged periods of time. Surgical treatment involves the fusing of the patient’s deformed joints using small implants or surgical pins, which can later be removed to restore normal function.

Plantar Fasciitis

Also known as jogger’s heel, this condition is caused by torn or inflamed heel ligaments, which may require the help of Foot Surgeons in Racine WI for permanent correction. Symptoms of Plantar Fasciitis include stabbing pain in the heel that usually manifests itself in the early morning and vanishes later in the day. Runners, people who are severely overweight, and those who wear shoes with hard heels are all at greater risk of developing this disorder.

Learn More Today

Want to find out if foot surgery may be a good long-term option for treating these or other foot disorders? Visit Greatlakesfootankle.com online for more information or call to schedule an appointment today to get started.

International participants showcase different industry cultures at 2008 Taipei Game Show

Friday, January 25, 2008

B2B Trade Area of Taipei Game Show, criticized by trade buyers last year, but accompanied with 2008 Taiwan Digital Content Forum, moved to the second floor at Taipei World Trade Center for world-wide participants with a better exchange atmosphere this year.

Not only local OBMs (Softstar Entertainment, Soft-World International Corp., International Games System Corp., …, etc.) but also companies from New Zealand, Canada, Japan, Hong Kong, and South Korea showcased different specialists with multiple styles. Especially on South Korea, participated members from G? Trade Show (Game Show & Trade, All-Round, aka Gstar) showcased gaming industry of South Korea and the G? upcoming at this November with brochures.

In the 2-days Digital Content Forum, world-class experts not only shared industry experiences, members from Taiwan Gaming Industry Association also discussed and forecasted marketing models for gaming industry. With participations from governmental, industrial, and academical executives world-wide, this forum helps them gained precious experiences of digital content industry from several countries.

According to the Taipei Computer Association, the show and forum organizer, the digital content industry in Taiwan was apparently grown up recent years as Minister of Economic Affairs of the Republic of China Steve Ruey-long Chen said at Opening Ceremony yesterday. Without R&Ds from cyber-gaming, and basic conceptions from policies and copyright issues, this (digital content) industry will be fallen down in Taiwan. If this industry wanted to be grown up in sustainability, gaming OBMs in Taiwan should independently produce different and unique games and change market style to market brands and games to the world.

Posted in Uncategorized

Federal Judge puts California’s Prison Health Care system into receivership

Saturday, July 2, 2005

U.S. District Judge Thelton Henderson of San Francisco has ordered the state’s health care system for prisoners be put under the control of a receiver to stop deaths of inmates due to medical malfeasance. The system provides medical care to 164,000 inmates at a cost of US$1.1 billion annually. Reportedly the judge described conditions in the state’s medical system as barbaric. The appointment of a receiver was the last resort available after repeated failures of Governor Schwartenegger’s administration to improve medical conditions at state prisons.

Sources:

  • Judge Takes Over State’s Troubled Prison Health Care System
  • Judge orders Rx for prison health care
  • Rx for state prison health care: Judge takes over

Posted in Uncategorized